Need help?Do you have a question about the Danfoss VLT 3532 and is the answer not in the manual?
General| Enclosure | IP20 |
|---|---|
| Supply voltage | 3 x 380-480 VAC |
| Input Voltage | 3 x 380-480 VAC |
| Control Mode | Vector Control |
| Protection Features | Overload, Overvoltage, Undervoltage, Short Circuit |
| Communication Interface | CANopen |
| Braking | Dynamic Braking |
Critical safety warnings regarding electrical and mechanical hazards.
Provides physical dimensions for various VLT 3500 models and enclosure types.
Guidelines for power wiring, shielded cables, and noise reduction.
Instructions for connecting motors and understanding terminal block functions.
Overview of drive display modes, navigation, and keypad operations.
Configuration of control modes (Local/Hand, Remote/Auto) and HOA functions.
Guide to accessing and understanding parameter groups and navigation.
Configuration of speed control signals and PI regulation for optimal performance.
Provides explanations and troubleshooting steps for fault and warning messages.
Technical data on terminal connections and torque specifications.
To Next Page