Danfoss VLT 5000 Crane Series Operating Instructions

VLT
®
5000 Series
■ Electrical installation
Conversion of analogue
inputs
Current input signal to voltage input
0-20 mA 0-10 V
4-20 mA 2-10 V
Connect 510 ohms resist
or between input terminal 53 and 55
(terminal 54 and 55) and adjust minimum and maximum values in
parameters 309 and 310 (parameters 312 and 313).
MG.51.A9.02 - VLT is a registered Danfoss trademark
56

Danfoss VLT 5000 Crane Series Specifications

General

Brand	Danfoss
Model	VLT 5000 Crane Series
Category	Media Converter
Language	English