Danfoss VLT 6102 - Page 36

VLT® Serie 2800 and VLT® Serie 6000 Modbus RTU
Message sent to Modbus master from Modbus RTU
Byte 0 Byte 1 Byte 2 Byte 3 Byte 4 Byte 6+7
Slave
Address
Function Byte Count Data HI Data LO Error Check
01 03 02 01 90 --
Note that the starting address of a register is the
parameternumberx10-1inHEX.
Byte 3+byte 4: 0190
HEX
=400=40%
All values are in hexadecimal.
MG.10.S1.22 - VLT is a registered Danfoss trademark
36