6.4 Configuring PROFIsafe with Siemens Step 7
This section explains how to configure PROFIsafe communication between VLT® Safety Option MCB 152 and Siemens device in
Siemens Step 7 environment.
6.4.1 Configuring the Hardware
Context:
Configure the PROFINET communication with the F-PLC using the VLT® PROFINET MCA 120 Installation Guide.
Configuring the Safety Option
Installation Guide | VLT®Safety Option MCB 152
AN327351953089en-000101 / 130R0578
42 | Danfoss A/S © 2020.02
To Next Page
Loading...
Need help?
General