EasyManuals Logo

Danfoss VLT HVAC Basic Drive FC 101 User Manual

Danfoss VLT HVAC Basic Drive FC 101
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #60 background imageLoading...
Page #60 background image
Temperature during storage/transport -30 to +65/70 °C (-22 to +149/158 °F)
Maximum altitude above sea level without derating 1000 m (3281 ft)
Maximum altitude above sea level with derating 3000 m (9842 ft)
Derating for high altitude, see chapter 6.3.2 Derating for Low Air Pressure and High Altitudes
Safety standards EN/IEC 61800-5-1, UL 508C
EMC standards, Emission EN 61800-3, EN 61000-6-3/4, EN 55011, IEC 61800-3
EMC standards, Immunity
EN 61800-3, EN 61000-3-12, EN 61000-6-1/2, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4,
EN 61000-4-5, EN 61000-4-6
Energy efficiency class IE2
1) Refer to special conditions in the design guide for:
Derating for high ambient temperature
Derating for high altitude
2) Determined according to EN50598-2 at:
Rated load
90% rated frequency
Switching frequency factory setting
Switching pattern factory setting
Specifications VLT®HVAC Basic Drive FC 101
58 Danfoss A/S © 08/2014 All rights reserved. MG18A622
66

Other manuals for Danfoss VLT HVAC Basic Drive FC 101

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Danfoss VLT HVAC Basic Drive FC 101 and is the answer not in the manual?

Danfoss VLT HVAC Basic Drive FC 101 Specifications

General IconGeneral
BrandDanfoss
ModelVLT HVAC Basic Drive FC 101
CategoryDC Drives
LanguageEnglish

Related product manuals