Need help?Do you have a question about the Danfoss VLT Micro Drive and is the answer not in the manual?
General| Enclosure | IP20 |
|---|---|
| Input Voltage | 200-240V AC |
| Communication | Modbus RTU |
| Output Voltage | 0-Input Voltage |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit |
| Relative Humidity | 5-95% (non-condensing) |
| Altitude | Up to 1000m above sea level |
Safety warnings, instructions, and precautions for installation and operation.
Overview of available literature, approvals, and power connection types.
Guidelines for physical installation, electrical connections, and component mounting.
Methods for configuring drive parameters using the LCP or PC software.
Detailed listing and explanation of all adjustable parameters for the drive.
Technical data including output current, input current, and efficiency for different models.
Information on protection, features, supply, outputs, inputs, and environment.
Guidelines for derating based on ambient temperature, air pressure, and operating speed.
List of available accessories such as control panels, filters, and mounting kits.
To Next Page
