Contents
1. How to Read these Operating Instructions
3
Copyright, Limitation of Liability and Revision Rights 3
Approvals 3
Symbols 3
2. Safety
5
General Warning 6
Before Commencing Repair Work 6
Special conditions 6
Avoid unintended Start 7
Safe Stop of the Frequency Converter (optional) 7
IT Mains 8
3. Introduction
11
Type Code String 12
4. Mechanical installation
15
Before starting 15
How to install 16
5. Electrical installation
23
How to connect 23
Mains wiring overview 26
How to connect motor - foreword 31
Motor wiring overview 32
How to Test Motor and Direction of Rotation. 37
6. Application Examples
45
Closed Loop Wiring 45
Submersible Pump Application 46
7. How to operate the frequency converter
49
Ways of Operation 49
How to operate graphical LCP (GLCP) 49
How to operate numeric LCP (NLCP) 54
Tips and tricks 57
8. How to programme the frequency converter
61
How to programme 61
Q1 My Personal Menu 62
Q2 Quick Setup 62
Q5 Changes Made 65
VLT
®
AQUA Drive
Operating Instructions
Contents
MG.20.M4.02 - VLT
®
is a registered Danfoss trademark
1
To Next Page
Need help?
General