Danfoss VLT AQUA Drive - Common Used Parameters - Explanations; Main Menu

After selecting a parameter group, choose a parameter by means of the
navigation keys.
The middle section on the GLCP display shows the parameter number and
name as well as the selected parameter value.
1
30BP067.10
Illustration 8.10: Display example.
8.2. Common Used Parameters - Explanations
8.2.1. Main Menu
The Main Menu includes all available parameters in the VLT
®
AQUA Drive FC 200 frequency converter.
All parameters are grouped in a logic way with a group name indicating the function of the parameter group.
All parameters are listed by name and number in the section
Parameter Options in these Operating Instructions.
All parameters included in the Quick Menus (Q1, Q2, Q3, Q5 and Q6) can be found in the following.
Some of the most used parameters for VLT
®
AQUA Drive applications are also explained in the following section.
For a detailed explanation of all parameters, please refer to the VLT
®
AQUA Drive Programming Guide MG.20.OX.YY which is available on
www.danfoss.com or by ordering at the local Danfoss office.
8.2.2. 0-** Operation / Display
Parameters related to the fundamental functions of the frequency converter, function of the LCP buttons and configuration of the LCP display.
0-01 Language
Option: Function:
Defines the language to be used in the display.
[0]
*
English
0-20 Display Line 1.1 Small
Option: Function:
Select a variable for display in line 1, left position.
[0] None No display value selected
[37] Display Text 1 Present control word
[38] Display Text 2 Enables an individual text string to be written, for display in the LCP or to be read via serial communication.
[39] Display Text 3 Enables an individual text string to be written, for display in the LCP or to be read via serial communication.
[89] Date and Time Readout Displays the current date and time.
[953] Profibus Warning Word Displays Profibus communication warnings.
[1005] Readout Transmit Error
Counter
View the number of CAN control transmission errors since the last power-up.
[1006] Readout Receive Error
Counter
View the number of CAN control receipt errors since the last power-up.
[1007] Readout Bus Off Coun-
ter
View the number of Bus Off events since the last power-up.
[1013] Warning Parameter View a DeviceNet-specific warning word. One separate bit is assigned to every warning.
VLT
®
AQUA Drive
Operating Instructions
8. How to programme the frequency converter
MG.20.M4.02 - VLT
®
is a registered Danfoss trademark 67
8