Need help?Do you have a question about the Danfoss VLT HVAC Drive FC 131 and is the answer not in the manual?
General| Cooling | Air-cooled |
|---|---|
| Input Voltage | 3 x 380 – 480 V ±10% |
| Control Method | V/f control, Vector control |
| Communication Protocols | BACnet MS/TP, Modbus RTU, CANopen, Profibus |
| Enclosure Type | IP20, IP21 |
Outlines the guide's aim for safe installation and commissioning.
Lists other resources for understanding advanced drive functions and programming.
Details the operating guide's version and software compatibility.
Lists certifications and approvals for the product.
Provides guidance on the proper disposal of the equipment.
Explains safety symbols and defines required qualifications for personnel.
Lists essential precautions for safe handling and operation of the drive.
Covers physical installation, side-by-side mounting, and unit dimensions.
General electrical installation, IT mains, and wiring principles.
Steps for connecting mains and motor, including enclosure-specific diagrams.
Guidance on protection devices, compliance, and EMC-correct installation.
Details on control terminals and the basic electrical wiring diagram.
Offers guidance on reducing acoustic noise and vibration.
Describes the structure and functions of the Local Control Panel.
Introduces the purpose and benefits of the setup wizard.
Details the steps for setting up the drive in open-loop mode.
Details the steps for setting up the drive in closed-loop mode.
Guides users through configuring motor-specific parameters.
Lists parameters that have been changed from default settings.
Provides the procedure for modifying parameter settings via the LCP.
Explains how to navigate and access all parameters through the main menu.
Provides a detailed list of drive warnings and alarms with causes.
Lists and explains error messages specific to the Local Control Panel.
Details the characteristics of the 3x380-480 V AC mains supply.
Presents the results of EMC emission tests.
Covers special conditions and derating for ambient temp and altitude.
Provides a broad overview of the drive's technical specifications.
Specifies cable lengths, digital inputs, analog inputs, and outputs.
Details specifications for control cards and relay outputs.
Specifies 10V DC output and ambient operating conditions.
To Next Page