Danfoss VLT AQUA Drive - 3 Introduction

3. Introduction
3.1. Introduction
3.1.1. Frequency Converter Identification
Below is an example of an identification label. This label is situated on the frequency converter and shows the type and options fitted to the unit. See
table 2.1 for details of how to read theType code string (T/C).
Illustration 3.1: This example shows an identification label for VLT AQUA Drive.
Please have T/C (type code) number and serial number ready before contacting Danfoss.
VLT
®
AQUA Drive
Operating Instructions
3. Introduction
MG.20.M4.02 - VLT
®
is a registered Danfoss trademark 11
3