Danfoss VLT Micro Drive - Default Chapter; Table of Contents

Contents
1 Quick Guide
1-1
1.1 Safety
1-1
1.1.1 Warnings 1-1
1.1.2 Safety Instructions 1-1
1.2 Introduction
1-2
1.2.1 Available Literature 1-2
1.2.2 Approvals 1-2
1.2.3 IT Line Power 1-2
1.2.4 Avoid Unintended Start 1-3
1.2.5 Disposal Instruction 1-3
1.3 Installation
1-3
1.3.1 Side-by-Side Installation 1-3
1.3.2 Mechanical Dimensions 1-4
1.3.5 Connecting to Line Power and Motor 1-7
1.3.6 Control Terminals 1-7
1.3.7 Power Circuit - Overview 1-9
1.3.8 Load Sharing/Brake 1-9
1.4 Programming
1-10
1.4.1 Programming with LCP 1-10
1.7 Specifications
1-16
1.8 General Technical Data
1-19
1.9 Special Conditions
1-22
1.9.1 Derating for Ambient Temperature 1-22
1.9.2 Derating for Low Air Pressure 1-22
1.9.3 Derating for Running at Low Speeds 1-22
1.10 Options for VLT
®
Micro Drive
1-23
2 Index
2-1
Contents
VLT
®
Micro Drive Quick Guide
MG02B722 - VLT
®
is a registered Danfoss trademark