To Next PageTo Next Page
Need help?Do you have a question about the Danfoss VLT MCD 202 Series and is the answer not in the manual?
General| Brand | Danfoss |
|---|---|
| Model | VLT MCD 202 Series |
| Category | Controller |
| Language | English |
Visual guides for different mounting configurations of the MCD 202 unit.
Key physical dimensions required for successful installation.
Table detailing the physical dimensions for each MCD 202 Series model.
Instructions and specifications for proper cable termination.
Overview of MCD 202 models with power, current, and AC ratings.
Visual wiring diagram with identification of connection terminals.
Description of the main contactor and auxiliary relay operations.
Details on various wiring setups and signal logic implementation.
Guidance on the correct sequence for applying control voltage.
Specification for contacts used with 24 VAC/VDC control voltage.
Critical instruction to disconnect power before maintenance or service.
Information on Class A design and potential radio interference in domestic settings.
Diagrams illustrating the connection of the motor thermistor.
How to adjust the Motor Full Load Current (FLC) parameter.
Setting the maximum current limit for the motor.
Adjusting the current ramp for motor start-up.
Description of the soft stop feature and its settings.
Setting parameters for motor protection trip classes.
Configuring the permissible excess start time.
Configuring the phase rotation protection function.
Setting up and utilizing the auxiliary relay.
Explanation of various indicator lights and their meanings.
Details on the different operating states and their indications.
Identifying and resolving problems occurring in the Ready state.
Steps for diagnosing and fixing motor overload or thermistor issues.
Solutions for issues related to phase imbalance and supply frequency.
Procedures for resolving communication failures between modules and networks.
