Need help?Do you have a question about the Danfoss VLT Compact Starter MCD 201 and is the answer not in the manual?
General| Type | Soft Starter |
|---|---|
| Frequency | 50/60 Hz |
| IP Rating | IP20 |
| Enclosure Rating | IP20 |
| Output Current | 9 - 160 A |
| Power Range | 2.2-160kW |
| Voltage Range | 208-600V AC |
| Starting method | Soft Start |
| Protection Features | Overload protection, Phase loss protection |
Explains the guide's purpose for the EtherNet/IP option module for VLT soft starters.
Defines the qualifications required for personnel installing and operating the equipment.
Covers electrical shock hazards, proper grounding, and unintended start warnings.
Details the steps for installing the EtherNet/IP option module onto a soft starter.
Explains how to connect the EtherNet/IP Module to the soft starter using specific terminals.
Explains how to configure Ethernet attributes using the module's built-in web server.
Introduces a tool for configuring the module when the IP address is unknown.
To Next Page