Danfoss VLT Compact Starter MCD 201 User Manual

9 Specications
Enclosure
Dimensions, W x H x D [mm (in)] 40 x 166 x 90 (1.6 x 6.5 x 3.5)
Weight 250 g (8.8 Oz)
Protection IP20
Mounting
Spring-action plastic mounting clips 2
Connections
Soft starter 6-way pin assembly
Contacts Gold ash
Networks RJ45
Settings
IP address BootP, automatically assigned, congurable
Device name Congurable
Network
Link speed 10 Mbps, 100 Mbps (auto-detect)
Full duplex
Auto crossover
Power
Consumption (steady state, maximum) 35 mA at 24 V DC
Reverse polarity protected
Galvanically isolated
Certication
RCM IEC 60947-4-2
CE IEC 60947-4-2
ODVA EtherNet/IP conformance tested
Environmental
Operating temperature -10 to +60 °C (14–140 °F), above 40 °C (104 °F) with derating
Storage temperature -25 to +60 °C (-13 to +140 °F)
Humidity 5–95% relative humidity
Pollution degree Pollution degree 3
Vibration IEC 60068-2-6
Specications EtherNet/IP Module
24 Danfoss A/S © 05/2017 All rights reserved. MG17Q102
99

Danfoss VLT Compact Starter MCD 201 Specifications

General

Brand	Danfoss
Model	VLT Compact Starter MCD 201
Category	Controller
Language	English