Danfoss VLT MCD 202 - Page 9

Danfoss Drives · DKDD.PB.551.A1.02 | 9
MCD 201
• Soft start/stop:
Timed voltage ramp
• Motor protection: not included
• System protection:
not included
• Metering: not included
• Start/stop control: via inputs or via
optional controller
• Network communication: optional
• Bypass: Internally bypassed
MCD 202
• Soft start: Current limit
• Soft stop: Timed voltage ramp
• Motor protection:
Thermistor, Motor overload,
Phase imbalance
• System protection: Phase rotation,
Excess start time, Bypass overload
& Instantaneous overload
• Metering: optional extra
• Start/stop control: via inputs or via
optional controller
• Network communication: optional
• Bypass: Internally bypassed
MCD 201 and MCD 202
• Current: 7.5 kW ~ 110 kW @400 V
• Mains voltage: 200 ~ 575 VAC
• Supply frequency: 45 ~ 66 Hz
• Enclosure: 7.5 ~ 55 kW IP 20,
75 ~ 110 kW IP00