Need help?Do you have a question about the Danfoss Weatherhead Coll-0-Crimp T-400-1 and is the answer not in the manual?
General| Brand | Danfoss |
|---|---|
| Model | Weatherhead Coll-0-Crimp T-400-1 |
| Category | Power Tool |
| Language | English |
Recommends reading booklet before set-up and retaining for reference.
Details crimping capacity, weight, and included tooling for the T-400-1 press.
Provides dimensions, weight, pressure, reservoir size, motor, and oil for the T-421U pump.
Instructions for installing the T-400-9 to automatically align hose ends for proper crimp location.
Specifications for the T-402-1 Air/Hydraulic pump, including dimensions, pressure, and oil type.
Specifications for the 1-403-2 Hand pump, detailing dimensions, pressure, and reservoir size.
Specifications for the 1-412 Mobile Electric pump, including voltage and flow rate.
Specifications for the T-421U Electric pump, covering dimensions, motor, and flow rate.
Steps for mounting the press, pumps, and connecting hose assemblies to the FH-135X stock cabinet.
Detailed steps for mounting the Coll-O-Crimp press and power unit onto a shop or work table.
Guidance on grounding, wiring, wire gauge, and battery size for the T-412 mobile pump setup.
Steps to check out the T-421U electric pump, including purging the system without tooling.
Steps to check out the T-402-1 air pump, including air pressure and purging the system.
Steps to check out the T-403-2 hand pump, including using the control valve and purging.
Steps to check out the T-412 12-volt DC pump, including purging the system.
Detailed steps for performing a crimp, from placing the die ring to inspecting the crimped end.
Guidance on placing hose ends and marking insertion depth for proper crimping.
Instructions on how to measure the crimp diameter for quality assurance.
A list of repair and replacement items with part numbers and descriptions for the Coll-O-Crimp press.
A table listing common problems, their causes, and solutions for the T-421U electric pump.
Detailed step-by-step instructions for diagnosing and resolving issues with the T-421U electric pump.
Details the FH-135X stock cabinet for organizing hose assemblies and equipment.
Details the FH-15X stock cabinet for organizing hose ends and adapters.
Provides contact details and addresses for various Danfoss Power Solutions offices globally.
To Next Page