Dannmar DB-70 - Symbols and Liability

DB-70 Automatic Wheel Balancer 5 P/N 5900261 — Rev. A1 — January 2021
• Make sure all Operators read and understand this Installation and Operation Manual. Keep the
Manual near the Wheel Balancing Machine at all times.
• Make a visual inspection of the Wheel Balancing Machine every day. Do not use the product if you
find any missing or damaged parts. Instead, take the Wheel Balancing Machine out of service, then
contact an authorized repair facility, your distributor, or Dannmar at (877) 432-6627.
• Dannmar recommends making a
thorough inspection of the product once a month. Replace any
damaged or severely worn parts, decals, or warning labels.
Symbols
Following are the symbols used in this Manual:
⚠ DANGER Calls attention to an immediate hazard that will result in death or severe injury.
⚠ WARNING Calls attention to a hazard or unsafe practice that could result in death or injury.
⚠ CAUTION Calls attention to a hazard or unsafe practice that could result in minor personal
injury, product damage, or property damage.
NOTICE Calls attention to a situation that, if not avoided, could result in minor personal
injury, product, or property damage.
Tip Calls attention to information that can help you use your product better.
Liability Information
Dannmar assumes NO liability for injury, death or damages resulting from:
• Use of this equipment for purposes other than those described in this Manual.
• Modifications to the equipment without prior, written permission from Dannmar.
• Injury or death caused by modifying, disabling, overriding or removing safety features.
• Damage to the equipment from external influences.
Incorrect operation of the equipment.