To Next PageTo Next Page
Need help?Do you have a question about the Dannmar DB-70 and is the answer not in the manual?
Identifies the product as the Dannmar DB-70 Automatic Wheel Balancer.
Describes the installation and operation procedures for the DB-70 Wheel Balancer.
Highlights critical DANGER warnings regarding injury or death from improper use.
Provides guidelines for inspecting shipments and handling the equipment safely.
Details safety rules, PPE requirements, and operating restrictions for safe use.
Explains warning symbols and outlines Dannmar's liability limitations.
A step-by-step checklist for proper installation of the wheel balancer.
Critical safety rules to follow during the installation process.
Specifies necessary tools and criteria for choosing an installation location.
Procedures for safely unpacking the unit and installing the main shaft.
Instructions for securely anchoring the balancer to the floor.
Guidance on connecting the unit to power sources, including voltage conversion.
Steps for attaching the protective tire cover assembly.
Essential precautions for safe and effective operation of the wheel balancer.
Overview of the control panel, buttons, and display windows.
Procedures for mounting wheels and taking necessary measurements for balancing.
Explanation of different balancing modes like DYN, ALU, and STA.
Detailed steps for operating the balancer in dynamic balance mode.
Detailed steps for operating the balancer in static balance mode.
Procedures for balancing aluminum alloy wheels using specific ALU modes.
Instructions for using OPT SP Split Weight and OPT Optimize functions.
Steps for calibrating the wheel balancer using a standard weight.
Configuration options for operation sound, display brightness, and control switches.
Procedures for testing unit functions to ensure proper operation.
Guidelines for daily, weekly, monthly, and yearly maintenance tasks.
Guidance on identifying and resolving common issues and error codes.
List and diagram of parts comprising the main cabinet assembly.
List and diagram of components for the main shaft assembly.
Parts lists and diagrams for pressure sensor and motor assemblies.
Diagrams and lists for encoder, main board, and inner distance arm parts.
Lists and diagrams for accessories, tire cover, and wiring harnesses.
General| Brand | Dannmar |
|---|---|
| Model | DB-70 |
| Category | Wheel Balancers |
| Language | English |
