PAGE 40 46210/46220-0998 <90-00036>
ABBREVIATIONS AND SUBSTITUTIONS
Several of the syntax commands can be abbreviated or replaced
by other commands. Here is a list of alternate commands:
REGULAR COMMAND ABBREVIATION OR SUBSTITUTION
Activate ACT
Bell BEEP or DING
Clear CLR
CPM C
Linefeed LF
Period PER
Query ? or Q
Reset RST
SG M or MAT
Switches DIPS
System SYS
Terminology TERMI
OUTPUT MESSAGES
Whenever there is a change of status of an alarm point or a
change in the status of a device, a report will be issued.
Example:
>SG 2 POINT 1 FAIL ALM LVL A
The example above shows an A-level alarm failure at input 17
(point 1 of subgroup 2). When the point returns to normal
operation, another report will be issued and the FAIL will
change to NORM.
Example:
>SG 2 POINT 1 NORM ALM LVL A
PRINTER SYNTAX
CONTINUED . . .
To Next Page
Loading...
