46210/46220-0998 <90-00036> PAGE 57
SG 5-10 Alarm subgroups 5-10
SG ALL All alarms
Input Example:
>SG 1 OPT
Output Response:
Only the commands SG # OPT and CPM # OPT give a response.
SG 1 OPTIONS A B C D A B C D A B C D A B C D
PASSWORD
Purpose:
Sets password for system security.
Format:
PASSWORD
Remarks:
Entry is followed by a query for a new password. If an old
password exists, it must be entered before setting a new one. As
the password is entered, asterisks appear on the screen to
safeguard the identity of the password. Maximum length is
seven characters.
The following commands are password protected:
All ACKNOWLEDGE commands
All control point commands except CPM # OPT and CPM #
PROV
LOG ON
LOG OFF
SG # DELAY 200
SG # DELAY 500
SG # OPT ________
SG # REVERSE #
TERMINOLOGY SG
TIME OUT #
PRINTER SYNTAX
To Next Page
Loading...
