PAGE 58 46210/46220-0998 <90-00036>
Input Example:
>PASSWORD
Output Response:
New Password: ******
PROVISIONING
Purpose:
Displays the option settings and memory locations where alarm
and control point information is stored.
Format:
PROV
SG # PROV
CPM # PROV
Remarks:
The command PROV gives a report on all the alarm and control
point subgroups. The commands SG # PROV and CPM # PROV
give a report on the subgroups specified.
# can be a range of subgroups from 1 through 16 or the word
ALL. Here are examples:
CPM 4 Control subgroup 4 (control points 49-64)
SG -10 Alarm subgroups 1-10 (alarm points 1-160)
SG 10- Alarm subgroups 10-16
SG 5-10 Alarm subgroups 5-10
SG ALL All alarms
Input Example:
>PROV
PRINTER SYNTAX
To Next Page
Loading...
