To Next PageTo Next PageWhy does my Dantherm CS030040A have a Low Temperature Alarm (F=06)?
A Low Temperature Alarm (F=06) on your Dantherm Air Conditioner indicates that there is insufficient heat load or the unit is oversized for the application. Contact Dantherm, Inc.
Why is my Dantherm CS030040A Air Conditioner condensate draining continuously?
Continuous condensate draining from your Dantherm Air Conditioner suggests that the enclosure is not properly sealed. Check and seal all openings to resolve this issue.
General| Refrigerant | R410A |
|---|---|
| Cooling Capacity | 3.0 kW |
| Air Flow Rate | 500 m³/h |
| Weight | 32 kg |
| Power Supply | 230V, 50Hz |
| Dimensions (H x W x D) | 700 x 250 mm |
Provides technical specifications like BTU/Hr, Voltage, Current, and Weight.
Visual representation with dimensions of the air conditioner unit.
Provides cutout dimensions and mounting hole locations for installation.
Details on connecting the unit to power, grounding, and other electrical aspects.
Guidance on diagnosing issues using fault codes, test sequences, and reset procedures.
A guide to identify and resolve common operational problems.
