Dantherm ACT-7 User Manual

ACT-7
USER MANUAL
en • de • fr • it • nl Rev. 1.1 • 2020-W06-3

Dantherm ACT-7 Specifications

General

Brand	Dantherm
Model	ACT-7
Category	Air Conditioner
Language	English

Summary

Introduction

This Manual Information

Identifies the document as a service manual for the ACT 7 unit.

Target Group

Specifies the intended users and their required competence.

Safety Precautions

Crucial safety instructions and disclaimer for operating the unit.

Copyright Notice

Legal notice regarding copying the service manual.

Reservations Clause

Dantherm reserves the right to make changes without prior notice.

Recycling Guidelines

Guidelines for environmentally responsible disposal of the unit.

Hazard Symbol Definitions

Explains the meaning of WARNING, CAUTION, and NOTICE symbols.

Product Description

Overall Description

General overview of the ACT 7's purpose and use.

ACT 7 System Connectivity

Details the components and interconnecting line of the ACT 7 system.

Data Sheet

Technical specifications and performance data for the ACT 7 unit.

Installation

Location Consideration

Guidance on optimal placement of the room unit for airflow.

Heat Exchanger Siting

Advice on positioning the external heat exchanger, considering water dripping.

Handling and Setup Procedures

Procedures for safely handling, setting up, and filling the unit.

Unit Handling

Instructions for safely moving and handling the room unit.

Fluid Handling Precautions

Warnings about skin contact with the water/glycol mixture.

Checking and Filling Fluid Level

Steps to check and top up the fluid level in the room unit.

Connecting Unit to Heat Exchanger

Detailed steps for connecting the room unit to the heat exchanger.

Electrical Supply Requirements

Requirements and precautions for connecting the unit to the power supply.

Dismantling Procedures

Step-by-step guide on how to safely disconnect the ACT 7 unit.

Operation

User Interaction Guide

General guidance and user interactions with the device.

General Recommendations

Basic checks and advice before operating the unit.

Air Flow Direction Adjustment

How to adjust the air outlet grilles for optimal airflow.

Control Panel Overview

Detailed explanation of the control panel buttons, display, and functions.

Display Indicators

Explains the various indicators and symbols shown on the unit's display.

Menu Overview and Settings

Describes main menu options for settings like temperature, alarms, offset, and language.

Service Guide

Preventative Maintenance Schedule

Details regular checks and cleaning for optimal performance and lifespan.

Air Filter Inspection and Cleaning

Instructions for removing, cleaning, and refitting the air filter.

Heat Exchanger Inspection and Cleaning

Procedure for cleaning the internal components of the heat exchanger.

Fault Finding and Solutions

A table listing common faults, symptoms, possible causes, and required actions.