Darfon HB51 - Changing the Mode of Operation; Setting System Time

Quick Installation Guide H B 51 Hybrid inverter
Rev.1 ©2018 Darfon Electronics Corp. 7 | Page
CHANGING THE MODE OF OPERATION
1. In System Setting page, press the
key twice.
2. Use the or keys to toggle
between modes and to select.
MODES OF OPERATION
1
Back-Up (Default)
2
Residential
3
TOU Without Battery Feed In
4
TOU With Battery Feed In
5
Remote Control
6
Peak Shave
3. (TOU Modes) Enter “High Price
Duration” in 24-hour notation. Use
the or keys to adjust each digit,
and use the key to set it.
4. When done, press the key. You
will see a message stating the
settings are being updated.
5. When you see “Setting OK!!”
message, pess any key.
6. Manually restart the inverter using
the main switch.
SETTING SYSTEM TIME
1. In the System Setting Page, press
to select “Time Setting”, and then
press .
2. Enter the date (DD/MM/YYYY) and
time (hh:mm:ss). Use the and
keys to adjust each digit, and use the
key to set it.
FIELD
RANGE
Ye a r
2010 to 2100
Month
1 to 12
Day
1 to 31
Hour
0 to 23
Minute
0 to 59
Second
0 to 59
3. When done, press the key. You
will see a message stating the
settings are being updated.
4. When you see “Setting OK!!”
message, pess any key.
5. Manually restart the inverter using
the main switch.