Darkglass Electronics microtubes 900 - Page 5

GAIN : Changes the volume of the signal the Active
4 Band EQ. You can set it low prior to ensuring the
cleanest operation possible or set it higher for more
aggressive growl.
BASS : +-12dB at 80Hz. Changes the low content of
the signal.
LOW MIDS
: +-12dB of the selected frequency via the
LOW MIDS ƒ switch (described below). Changes the
lower mid content of the signal.
LOW MIDS ƒ
: Use this switch to change the
frequency of the low mid band from 250Hz, 500Hz
or 1kHZ.
HI MIDS
: +-12dB of the selected frequency via the
HI MIDS ƒ switch (described below). Changes the
higher mid content of the signal.
HI MIDS ƒ
: Use this switch to change the frequency
of the hi mid band from 750Hz, 1.5kHz and 3kHZ.
TREBLE
: +-12dB at 5kHz. Changes the high content
of the signal.
MASTER
: Controls the overall volume of the
amplifier.
MUTE
: Mutes the amplifier.