FREQUENTLY ASKED QUESTIONS
Q: How to update the unit ?
A: Please contact your dealer to download the MCU/UPDATE files and copy to the
USB or SD card, plug to the SD port or USB port. Go to the setting, system, click
MCU update or system update.(Make sure only Update file in the USB to be
recognized.)
Q: How do I connect the camera to your unit ?
A: Please connect your camera video output cable to our unit camera in video
cable. make sure your camera power also connect correctly.
Tips: normally if your unit has CANBUS, the unit will go reverse image automati
cally, if your unit does not have CANBUS, you need connect the reverse detect
cable manually.
Q: I do not have camera, but the unit go reverse image automatically and shows a
black screen with an exclamation point in a yellow triangle, can I turn it off ?
A: Click Setting-Car-Factory setting, password 126, Others-Prohibit reverse-Disable
Q:How to see the guides if my car has original rear camera?
A:Click Setting-Car-Extra Setting-reversing trajectory display-On.
Q:How to listen the music when using the navigation application?
A:Click Setting-Car-Navigation setting-Navigation monitoring-On. Click sound
mode-Mixing .
Q:How to cancel the screen saver?
A:Click Setting-Display-Audio Screen Timeout-Off.
Q:How to get the image when i use the video application?
A:Click Setting-Car-the driving setting-the watch video option-On.
To Next Page
Loading...