∙ 10 ∙ ∙ 11 ∙
Parts & Features
Before Using your Alex by Dash Bundt Maker
Removable
Cake Tray
Handles
(on cake tray)
Lid Handle
Cover
Upper Bundt Plate
Power Light (red)
Ready Light (green)
(Top)
Lower Bundt Plate
Base
1. Carefully unpack the Electric Rotating Bundt Cake Maker and remove all packaging
and materials.
2. Before using your Electric Rotating Bundt Cake Maker for the rst time, lift the Lid
to expose the Removable Cake Tray. Grasp the Handles to remove. Wash and rinse
the Cake Tray before use.
3. Wipe upper and lower bundt cake plates with a damp cloth to remove all dust,
then dry. Wipe outer surfaces and base with a slightly damp, soft cloth or sponge.
CAUTION: Take care to prevent water from running into the appliance. NEVER
IMMERSE THE BUNDT MAKER IN WATER OR ANY OTHER LIQUIDS!
4. Before using, re-insert the Removable Cake Tray into the
Lower Bundt Plate. Align the Removable Cake Tray handles
with the cutouts in the body, making sure the bottom sits
at Into the Lower Bundt Plate. (Photo 1)
5. Store Electric Rotating Bundt Cake Maker with the lid
closed. Turn the unit to the vertical position and fold the
handle down for compact storage until use. (Photo 2)
NOTE: If the Removable Cake Tray Handles are not
correctly positioned, the Bundt Cake Maker will not rotate.
To Next Page
Loading...
Need help?
General
