EasyManuals Logo

Dash Bundt User Manual

Dash Bundt
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
∙ 12 ∙
Using Your Alex by Dash Bundt Maker Using Your Alex by Dash Bundt Maker
13
1. Place the Electric Rotating Bundt Cake Maker on a at,
stable surface.
2. IMPORTANT: Make sure the Removable Cake Tray is in
position in the Lower Bundt Plate.
3. If the Lid Handle is folded, unfold to extend and close the
lid. Fold handle to either side to avoid contact during use.
4. Prepare cake batter.
5. Plug unit into a 120 V AC electrical outlet to preheat. The red
Power Light will illuminate.
NOTE: When the Electric Rotating Bundt Cake Maker is
heated for the rst time, it may emit slight smoke or odor.
This is normal and should disappear after 1 or 2 uses. This
does not affect the safety of the appliance. However, as it
may affect the avor of the rst cake prepared in the Electric
Rotating Bundt Cake Maker, it is recommended that this cake
be discarded.
6. After approximately 2 to 3 minutes, the green READY light will
illuminate, indicating the unit is preheated and is ready for
use.
7. Using the Lid Handle, rotate the unit counter-clockwise until
the Bundt Cake Maker’s bundt cake plates are positioned at
and locked into a stable horizontal position, with indicator
lights on top. Unfold the lid handle and lift to expose the
bundt cake plates.
IMPORTANT: Make sure the removable cake tray is in position in the lower cake plate.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dash Bundt and is the answer not in the manual?

Dash Bundt Specifications

General IconGeneral
BrandDash
ModelBundt
CategoryKitchen Appliances
LanguageEnglish

Related product manuals