∙ 18 ∙
Cleaning & Maintenance
• Unplug the Egg Bite Maker and allow it to cool completely prior to
cleaning or moving.
• Thoroughly clean the Egg Bite Maker after every use.
• Do not clean the Heating Plate with metal kitchen utensils or abrasive
cleaning materials as these can damage the Heating Plate’s coating.
• To clean the exterior of the Egg Bite Maker, wipe it down with water,
dish soap, and a non-abrasive sponge or soft cloth.
• NOTE: DO NOT submerge the Egg Bite Maker in water.
• Clean the Silicone Cups with a soft cleaning brush to remove any food
residue.
• Make sure that the Egg Bite Maker is unplugged and all parts are clean
and dry before storing.
NON-ABRASIVE
SPONGE
Scrub with a
homemade
SUBMERGE IN
WATER
Do Not
To Next Page
Loading...
