∙ 8 ∙
∙ 9 ∙
To attach, simply guide the bottom edge of the Cutting Board
(patterned side down) into the bottom edge of the Prep Station.
A magnet will pull the two components together, rmly attaching
the Board to the Station. The bottom side of the Cutting Board
should not be used as a cutting surface, only the side facing up
while attached to the Station is suitable for cutting.
before using the prepdeck
• Remove all packaging materials.
• Check that the Prepdeck has no visible signs of damage and that no
parts are missing.
• Before using Prepdeck for the rst time or before using it after prolonged
storage, wash and dry the Deck and any accompanying accessories. See
“Cleaning & Maintenance” for instructions.
• The Cutting Board is packaged separately but attaches directly to the Prep
Station via a strong magnetic strip. Prior to use, it will be necessary to attach
the two components.
To Next Page
Loading...
Need help?
General
