Dash Turbo POP - Using Your Popcorn Maker; Assembly and Surface Placement; Add Kernels; Add Optional Butter

∙ 10 ∙
NOTE: Wash the Popcorn Maker and parts with a damp cloth prior to use.
Dry before using.
WARNING: DO NOT put butter into the Aluminum Heating Chamber.
CAUTION: Aluminum Heating Chamber will get very hot. NEVER insert
ngers into the chamber while operating, or after use.
1. Assemble the Popcorn Maker by placing
the Top Cover onto the Body until it clicks into
place, then set the Popcorn Maker on a at
and stable surface.
2. Using the Measuring Cup, add one Measuring
Cup of kernels into the Aluminum Heating
Chamber through the Popcorn Inlet. Note:
one cup is enough, any more will overll the
Popcorn Maker and will keep the appliance from
functioning.
3. Put the Measuring Cup back on the Top
Cover after each use. You have the option to
place a tablespoon of butter into the Measuring
Cup as it will melt over the duration of the
popping period.
USING YOUR POPCORN MAKER