9 • Air Cooled Condenser User Manual
Only qualied and experienced service technicians should perform installation and maintenance on
this product. Equipment damage and personal injury can result from improper piping installation,
leak checking and improper handling.
This equipment is designed to operate properly and produce rated capacities when installed in ac-
cordance with industry standards. Failure to meet the following conditions could result in voiding
the warranty:
• System piping must be installed following industry standards for good piping practices
• System must be thoroughly leak checked before initial charging
• System power supply must meet voltage tolerance (see section 3.4)
• All controls and safety devices properly connected per wiring diagram
• Factory installed wiring must not be changed without written factory approval
Additionally, the refrigerant piping must comply with local code. After piping is completed all joints
(and connections) should be leak tested.
To Next Page
Loading...
