EasyManua.ls Logo

Data Translation DT300 Series - User Manual

Data Translation DT300 Series
164 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DT300 Series
UM-16501-T
User’s Manual
Title Page

Table of Contents

Other manuals for Data Translation DT300 Series

Questions and Answers

  • L
    Luis OrtegaAug 12, 2025
    What to do if Data Translation PCI Card does not boot?
    • M
      Mrs. Zoe GoodwinAug 12, 2025
      First, ensure that your DT300 Series board is correctly seated in a PCI slot and secured with a screw. If the issue persists, the computer's power supply might be insufficient. Check the power requirements of your system and consider upgrading to a larger power supply.
  • L
    Lori MezaAug 19, 2025
    Why Data Translation PCI Card board does not respond?
    • M
      Michael MaxwellAug 19, 2025
      The Data Translation PCI Card might not be responding due to several reasons. First, the board configuration could be incorrect, so verify the device driver settings to ensure the board name and type are accurate. Second, the board may not be properly aligned in the PCI expansion slot, so check that the DT300 Series board is correctly seated in the appropriate PCI slot. If neither of these solutions work, the board may be damaged.
  • K
    Katherine NormanAug 27, 2025
    What causes intermittent operation of Data Translation DT300 PCI Card?
    • C
      chungjulieAug 27, 2025
      Intermittent operation of your Data Translation PCI Card can stem from a few causes. Check your wiring and tighten any loose connections or cushion vibration sources. It could also be due to the board overheating, so check the environmental and ambient temperature. Electrical noise may also be a factor, so check your wiring and either provide better shielding or reroute unshielded wiring.
  • S
    Stephen McguireSep 4, 2025
    How to troubleshoot invalid data from Data Translation PCI Card?
    • B
      Brenda HumphreySep 4, 2025
      If the data from your Data Translation PCI Card appears invalid, it could be due to an open connection, so check your wiring and fix any open connections. Another possibility is that a transducer isn't connected to the channel being read, so check the transducer connections. Also, ensure that the board setup matches your hardware configuration, especially regarding differential vs. single-ended inputs.

Data Translation DT300 Series Specifications

General IconGeneral
Bus InterfacePCI
Analog Inputs16 Single-Ended or 8 Differential
Analog Outputs2
D/A Resolution12-bit
Digital I/O8
Counter/Timers1
Input Range±10V, ±5V, ±2.5V, 0-10V
TriggeringSoftware, external digital
A/D Resolution12-bit