Need help?Do you have a question about the Datacolor 500 and is the answer not in the manual?
General| Model | Datacolor 500 |
|---|---|
| Light Source | Pulsed Xenon |
| Wavelength Interval | 10 nm |
| Type | Spectrophotometer |
| Geometry | d/8° |
| Aperture Size | 6 mm |
| Spectral Range | 360 nm to 700 nm |
| Inter-Instrument Agreement | 0.15 ΔE*ab (average) |
| Measurement Time | ~2 seconds |
| Measurement Area | 6 mm |
| Ports | USB |
| Battery Life | Not applicable (AC powered) |
Covers user-serviceable parts, light source viewing, power cord usage, and handling warnings.
Provides guidance on safe placement and movement of the instrument, recommending two people for lifting.
Describes the black trap, white tile, and green tile provided for calibration and diagnostic tests.
Explains how to open the transmission compartment using side-latch buttons for sample insertion.
Instructions for installing or updating White Calibration Tile data using a USB Memory Stick.
General guidance on the calibration process, including using the Remote Measure Button.
Step-by-step instructions for performing reflectance calibration using black trap and white tile.
Details the use of the MAV aperture plate and black card for transmittance calibration.
Describes measuring regular transmittance for transparent samples using cuvette or solid holders.
Covers annual servicing by authorized technicians and general care for instrument longevity.
Proper methods for handling calibration tiles to avoid damage and ensure accuracy.
Detailed steps for cleaning tiles using specific detergents and avoiding abrasive materials.
To Next Page
