Need help?Do you have a question about the Datacolor 800 and is the answer not in the manual?
General| Model | Datacolor 800 |
|---|---|
| Category | Measuring Instruments |
| Type | Spectrophotometer |
| Measurement Range | 0 to 200% reflectance |
| Light Source | Pulsed Xenon |
| Wavelength Interval | 10 nm |
| Ports | USB, Ethernet |
| Wavelength Range | 400 to 700 nm |
| Aperture Sizes | 4 mm |
| Measurement Area | MAV: ~9 mm, SAV: ~4 mm |
| Operating Conditions | 10° to 40° C (50° to 104° F) |
Warns users not to stare directly into the light source during operation to prevent eye discomfort.
Instructs to disconnect power before servicing and use an earthed power supply.
Recommends using two hands for moving the instrument and placing it on a stable benchtop.
Details the black, white, and green tiles provided and their uses for calibration and testing.
Lists standard and optional aperture plates with varying sizes for sample measurement.
Describes the LCD Status Display and the information it shows about instrument settings.
Explains how to install calibration data from a USB Memory Stick or CD.
Outlines the steps for performing reflectance calibration using black and white tiles.
Details the steps for transmittance calibration using the barium-coated MAV aperture plate and black card.
Guides on how to present samples for reflectance measurements.
Lists detailed technical specifications for the Datacolor 800 instrument.
To Next Page
