Datacolor 800, 850, 500, and 550 Series User’s Guide 10
Transmission Accessories
The following accessories must be installed in order to perform transmission measurements:
Transmission Sample Holder
Base.
Used to mount the
Transmission Sample Holders.
Installed at the factory.
Transmission Sample Holders.
Installed as required by user.
Spill Tray.
Installed at factory to catch minor
spills.
NOTE
The cuvette holder is designed to hold an optical glass cuvette 50mm X 10mm (Datacolor
Part No. 2950-0004).
Solid Sample
Holder
Cuvette Holder
(Liquid Samples)
To Next Page
Loading...
