Datacolor 800 User Manual

Datacolor 800, 850, 500, and 550 Series User’s Guide  28
Sample Viewing Display
When measuring samples on the Datacolor 800, 800V, and 850, the status display also
serves as a display for sample placement. Toggle to the sample camera view on the LCD
by pressing and holding the Remote Measure Button for approximately one second.
Remote Measure Button
The button at the top of the instrument is used to start a measurement from the instrument,
rather than from the program. Depending upon your instrument model, it can also be used
to toggle to and from a display of video from an internal camera used for sample
placement. Toggling the display between the LCD Status Display and the camera video
can be performed by pressing and holding the button down for approximately one second.

Datacolor 800 Specifications

General

Brand	Datacolor
Model	800
Category	Measuring Instruments
Language	English