CBX500 INSTALLATION MANUAL
4
ACCESSORIES
The following accessories are available on request for the CBX500:
Name Description Part Number
* BM100 Backup Module 93ACC1808
* BM150 Display Module 93ACC1809
* BM200/210 Ethernet TCP/IP Module STD/IP65 93ACC1851, 93ACC1852
* BM300/310 Profibus Module STD/IP65 93ACC1810, 93ACC1811
* BM400 DeviceNet Module IP65 93ACC1814
* BM500/510/520 EtherNet/IP Module STD/IP65/IP54 93ACC1812, 93ACC1813,
93ACC1840
* BM600 CANopen Module STD 93ACC1815
* BM700/710 Profinet Module STD/IP65 93ACC1816, 93ACC1886
* BM1100 CC-Link Module STD 93ACC1845
* BM1200/1210 Modbus TCP STD/IP65 93ACC1848, 93ACC1849
BA100 DIN Rail Adapters 93ACC1821
BA200 Bosch Adapters 93ACC1822
BA300 M12 3PF Service Connector 93ACC1877
BA400 M12 3PM External Power Connector 93ACC1853
BA500 M12 4PF Trigger Connector 93ACC1854
BA600 M12 5PF ID-NET Out Connector 93ACC1855
BA700 M12 5PM ID-NET In Connector 93ACC1856
BA900 Two Cable Compression Conn. Panel 93ACC1847
ADP-MM1 Gender Changer 25P M/M (5 pcs) 93ACC1828
NOTE: Not all readers support all CBX accessories. Compatibility
between the accessories marked with an asterisk (*) and your reader
depends on the reading device application software. See the "Accessories"
paragraph in your reading device Reference Manual for the list of supported
CBX Series accessories.
SAFETY PRECAUTIONS
ATTENTION: READ THIS INFORMATION BEFORE INSTALLING THE PRODUCT
POWER SUPPLY
This product is intended to be installed by Qualified Personnel only.
This product is intended to be connected to a UL Listed Direct Plug-in Power Unit marked LPS
or “Class 2”.
CAUTION: Total power consumption is given by adding the CBX500 power
consumption to that of all the devices powered through the CBX500 (reading
device, P.S., I/O). Refer to the manual of the connected devices for details
about minimum/maximum supply voltage and power consumption.
Each CBX500 supports only 1 single reading device + system accessories.
To Next Page
Loading...
Need help?
General