Configuration
Quick Reference Guide 9
USB
WEDGE
Configuration
BC9x80-BT Ethernet Models
BC9x80 configuration can be performed using the Datalogic Aladdin software
configuration program or by reading configuration bar codes with the Power-
Scan PBT9X00 reader.
Non-Ethernet Models
The BC9xx0-BT configuration can be performed in three ways: by using the
Datalogic Aladdin
™
software configuration program, by sending configuration
strings from the Host PC via the RS-232 or USB-COM interface or by reading
configuration bar codes with the PowerScan
™
BT9X00 reader.
Datalogic Aladdin™
Datalogic Aladdin
™
is a multi-platform utility program that provides a quick
and user-friendly configuration method via the RS-232/USB-COM interface.
It also allows upgrading the software of the connected device (see the Data-
logic Aladdin
™
Help On-Line for more details).
Serial Configuration
By connecting the BC9xx0-BT to a PC through an RS-232 or USB-COM inter-
face cable it is possible to send configuration strings from the PC to BC9xx0-
BT.
To Next Page
Loading...