Datalogic QuickScan i QD2100 Quick Reference Guide

Ergonomic Recommendations
Quick Reference Guide 13
Ergonomic Recommendations
• Reduce or eliminate repetitive motion
• Maintain a natural position
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures.
Regulatory Information
All models are designed to be compliant with rules and regula-
tions in locations they are sold and will be labeled as required.
Any changes or modifications to equipment, not expressly ap-
proved by Datalogic could void the user's authority to operate
the equipment.
Power Supply
Use only a power supply approved by Datalogic for this prod-
uct and model. Models require either a Listed class II or class
III with a Limited Power Source(LPS) which supplies power di-
rectly to the imager. For the safety certification to be valid, class
III input power sources must be IEC/EN60950-1 (EN
60335-series, EN 60065 or relevant) approved.
Input: 100 - 240 VACOutput: 5.2 VDC
Max Current: 0.4 AmpsPower: 15 Watts
CAUTION
In order to avoid or minimize the
potential risk of ergonomic injury fol-
low the recommendations below.
Consult with your local Health &
Safety Manager to ensure that you
are adhering to your company’s
safety programs to prevent employee
injury.
NOTE
For USB Power Off Ter-
minal applications,
attach to USB 1.0, 1.1 or
2.0 host device only.
Atención
Características de la
fuente de alimentación
eléctrica.
Entrada: 100 - 240 Vca
350mA 50/60 Hz
Salida: +5 VDC @ 2.5A
(-) Negativo al centro
Utilice en su red solo fuentes certificadas
en Argentina.
El uso de fuentes de alimentación no
compatibles puede resultar en riesgo de
incendio o de choque eléctrico para el
usuario.

Datalogic QuickScan i QD2100 Specifications

General

Scan speed	8 sec/page
Wavelength	610 nm
Tilt angle range	-65 - 65 °
Decoding standards	1D / GS1 DataBar China Post GS1 DataBar Expanded/ Stacked/ Stacked Omnidirectional
Dimensions (WxDxH)	170 x 66 x 71 mm
Standard interfaces	RS-232, USB, Keyboard wedge
Input voltage	5 V
Power consumption	340 mA
Product color	White
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Weight	121.9 g