Linking the Reader
10 QuickScan™ QBT21X1
When scanning a bar code label, you can adjust the distance
or angle to the label to help facilitate reading.
Aim and Scan
Linking the Reader
Link Datalogic RF Devices to Base
For RF devices, before configuring the interface it is nec-
essary to link the handheld with the base.
To link the handheld and the base, press the trigger to
wake up the handheld and mount it into the base. If the
reader was previously linked to another base, you must
first press and hold the button on the base (>5 seconds),
To Next Page
Loading...
