EasyManua.ls Logo

Datalogic QuickScan QD2590

Datalogic QuickScan QD2590
303 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
L
QuickScan™ QD2590
PRODUCT REFERENCE GUIDE
General Purpose Corded
Area Imager Bar Code Reader

Table of Contents

Other manuals for Datalogic QuickScan QD2590

Questions and Answers:

Datalogic QuickScan QD2590 Specifications

General IconGeneral
TypeHandheld bar code reader
Sensor type-
Scanner type1D/2D
Scanner resolution0.17 mm
Tilt reading angle0 - 360 °
Pitch reading angle0 - 65 °
Light levels (direct sunlight)0 - 100000 lx
Linear (1D) barcodes supportedCPC Binary, Codabar, Codabar 125, Code 11, Code 128, Code 128A, Code 128B, Code 128C, Code 25 (IR 2 of 5), Code 25 (non-IR 2 of 5), Code 3 of 9, Code 32, Code 39, Code 93, DUN 14, DataBar14, Discrete 2 of 5, EAN 128, EAN 2, EAN 5, EAN-13, EAN-8, Facing Identification Mark, GS1 DataBar, GS1 DataBar Expanded, GS1 DataBar Omnidirectional, GS1 Databar Limited, GS1-128 (UCC/EAN-128), HIBC, IATA, ISBN, ISSN, ITF-14, ITF-6, Industrial 2 of 5, Intelligent Mail, Interleaved 2 of 5, JAN, Latent image, MSI, Matrix 2 of 5, PDF417, PLANET, POSTNET, Pharmacode, Plessey, PostBar, RM4SCC / KIX, S-Code, Telepen, Trioptic, U.P.C., UPC-A, UPC-E
Optical sensor resolution (W x H)1280 x 800 pixels
2D (matrix & stacked) barcodes supportedAztec Code, Data Matrix, Dot Code A, MaxiCode, Micro QR Code, QR Code
Cable length2 m
Standard interfacesUSB
Connectivity technologyWired
Product colorBlack
Image formats supportedBMP, JPEG, TIFF
International Protection (IP) codeIP52
Input voltage5 V
Power consumption450 mA
Cables includedUSB Type-C
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)0 - 95 %
Sustainability certificatesRoHS
MaterialPolyvinyl chloride (PVC)
Connector 1USB C
Product typeUSB cable
Connector genderMale/Male
Brand compatibilityDatalogic
Connector 1 form factorStraight
Harmonized System (HS) code84733020
Weight and Dimensions IconWeight and Dimensions
Depth126 mm
Width148 mm
Height68 mm
Weight145 g

Summary

Preface

About this Manual

Overview of the manual, its purpose, and downloadable resources.

Manual Conventions

Explains the conventions and symbols used throughout the document.

Technical Support

Information on obtaining technical assistance through the Datalogic website or resellers.

Chapter 1. Introduction

About the Reader

Introduces the QuickScan QD2590 scanner, its features, and target applications.

Using the QuickScan QD2590 Reader

Explains basic operation, aiming system, and reading capabilities.

Programming the Reader

Details methods for configuring the reader via bar codes or software.

Chapter 2. Setup

Unpacking

Instructions for checking contents and handling potential shipping damage.

Setting Up the QuickScan QD2590 Reader

Step-by-step guide for connecting the reader to a host.

Connect Host Interface

Details how to connect various interface cables to the reader.

Stand Installation

Information on setting up the hands-free stand and holder for the reader.

Reader and LEDs Description

Identifies the components of the reader, including LEDs and triggers.

Using the QuickScan QD2590

Explains the aiming system and how the reader indicates a successful read.

Interface Selection

Guides the user through selecting the appropriate host interface type.

Chapter 3. Configuration With Bar Codes

Configuration Parameters

Introduces parameters for configuring the reader using bar codes.

Symbology-specific parameters

Describes settings for 1D and 2D symbologies and programming procedures.

Global Interface Features

Covers features configurable across all interface types.

Chapter 4. References

RS-232 Parameters

Explanations and examples for RS-232 specific settings.

RS-232 USB COM Parameters

Explanations and examples for parameters common to RS-232 and USB interfaces.

Keyboard Interface

Explanations and examples for keyboard interface settings.

Data Format

Details on data editing, prefixes, suffixes, and label identifiers.

Scanning Features

Explanations for various scanning modes and timing settings.

LED and Beeper Indicators

Explanations for LED and beeper feedback during operation.

Symbologies

Information on length control settings for various symbologies.

Appendix A. Technical Specifications

QD2590 Technical Specifications

Lists electrical, optical, environmental, and physical characteristics of the QD2590.

Common Reading Characteristics

Details reading performance, such as depth of field for various symbologies.

Decoding Capabilities

Lists all supported 1D and 2D barcode symbologies.

Appendix B. Standard Defaults

Standard Defaults

Lists default configuration settings for various parameters.

Default Exceptions by Interface Type

Lists default exceptions based on the interface type selected.

Appendix C. Sample Barcodes

Sample Barcodes

Provides visual examples of 1D and 2D barcodes for reference.

Appendix D. Keypad

Keypad

Displays barcode representations of keypad digits and characters for programming.

Appendix E. Scancode Tables

Control Character Emulation

Explains control character emulation settings for keyboard interfaces.

Single Press and Release Keys

Details key press and release methods for control character emulation.

Interface Type PC AT PS2, USB-Keyboard or USB-Keyboard for Apple

Scancode tables for PC AT/PS2 and USB keyboards with control character 00 or 01.

Interface Type PC AT PS2 Alt Mode or USB-Keyboard Alt Mode

Scancode tables for PC AT/PS2 and USB keyboards with Alt mode.

Digital Interface

Scancode tables for digital interfaces.

IBM31 XX 102-Key

Scancode table for the IBM31XX 102-key keyboard.

IBM XT

Scancode table for the IBM XT keyboard.

Appendix F. ASCII Chart

ASCII Chart

Provides a reference chart of ASCII characters and their hexadecimal values.

Related product manuals