Datalogic QuickScan QD2590 User Manual

STANDARD DEFAULTS
260 QUICKSCAN™ QD2590
Scan Mode Trigger Simple 79
Scanning Active Time 5 seconds 80
Flash On Time 10 = Flash is ON for 1 second 80
Flash Off Time 06 = Flash is OFF for 600ms 81
Double Read Timeout 0.6 second 81
Stand /Base Detection Behavior
Switch to Stand Mode/Object Detection
83
Stand Mode/Object Detection Indica-
tion (Stand Mode Flash)
Disable 84
Stand Mode/Object Detection Sensi-
tivity
Medium 84
Stand Mode/Object Detection Illumi-
nation Off Time
1 second 85
Corded Stand Mode Disable 85
Dock Detection Beep Disable 86
Power On Alert
Power-up Beep
87
Good Read Beep Type Mono 87
Good Read Beep Frequency High 88
Good Read Beep Length 80 msec 89
Good Read Beeper Volume / Vibra-
tion
High 90
Silent Mode Disable 91
RGB Good Read Enable Enable 91
RGB Good Read Color GREEN 92
Good Read LED Duration 300 msec 93
Good Read: When to Indicate After Decode 94
Green Spot Duration Short (300 msec) 95
Illuminator Intensity High 96
Aiming Pointer Enable 97
Aiming Duration Timer Aiming Off After Decoding 97
Pick Mode Disable 98
Mobile Phone Mode Enable 98
Mobile Phone Saturation Rate 00 99
Decode Negative Image Disable 100
PARAMETERS DEFAULT
YOUR SETTING PAGE NUMBER

Datalogic QuickScan QD2590 Specifications

General

Type	Handheld bar code reader
Sensor type	-
Scanner type	1D/2D
Scanner resolution	0.17 mm
Tilt reading angle	0 - 360 °
Pitch reading angle	0 - 65 °
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	CPC Binary, Codabar, Codabar 125, Code 11, Code 128, Code 128A, Code 128B, Code 128C, Code 25 (IR 2 of 5), Code 25 (non-IR 2 of 5), Code 3 of 9, Code 32, Code 39, Code 93, DUN 14, DataBar14, Discrete 2 of 5, EAN 128, EAN 2, EAN 5, EAN-13, EAN-8, Facing Identification Mark, GS1 DataBar, GS1 DataBar Expanded, GS1 DataBar Omnidirectional, GS1 Databar Limited, GS1-128 (UCC/EAN-128), HIBC, IATA, ISBN, ISSN, ITF-14, ITF-6, Industrial 2 of 5, Intelligent Mail, Interleaved 2 of 5, JAN, Latent image, MSI, Matrix 2 of 5, PDF417, PLANET, POSTNET, Pharmacode, Plessey, PostBar, RM4SCC / KIX, S-Code, Telepen, Trioptic, U.P.C., UPC-A, UPC-E
Optical sensor resolution (W x H)	1280 x 800 pixels
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, Dot Code A, MaxiCode, Micro QR Code, QR Code
Cable length	2 m
Standard interfaces	USB
Connectivity technology	Wired
Product color	Black
Image formats supported	BMP, JPEG, TIFF
International Protection (IP) code	IP52
Input voltage	5 V
Power consumption	450 mA
Cables included	USB Type-C
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Sustainability certificates	RoHS
Material	Polyvinyl chloride (PVC)
Connector 1	USB C
Product type	USB cable
Connector gender	Male/Male
Brand compatibility	Datalogic
Connector 1 form factor	Straight
Harmonized System (HS) code	84733020

Weight and Dimensions

Depth	126 mm
Width	148 mm
Height	68 mm
Weight	145 g