Datalogic QuickScan QD2590

ENTER/EXIT PROGRAMMING MODE READING PARAMETERS
98 QUICKSCAN™ QD2590
Pick Mode
Specifies the ability of the reader to decode labels only when they are close to the cen-
ter of the aiming pattern. This allows the reader to accurately target labels when they
are placed close together, such as on a pick sheet.
The Pick Mode can be enabled only in Trigger Single Scan Mode.
Mobile Phone Mode
This mode is useful for scanning bar codes displayed on a mobile phone. Other options
for this feature can be configured using the Datalogic Aladdin application.
NOTE: This feature is not compatible with Multiple Labels Reading in a Vol-
ume.
$CSNPM00

Pick Mode = Disable
Pick Mode = Enable
$CSNPM01
$CSNPE00
Mobile Phone Mode = Disable

Mobile Phone Mode = Enable
$CSNPE01
$CSNPE02
Mobile Phone Mode = Enhanced