Do you have a question about the Datalogic QuickScan QD2430 and is the answer not in the manual?
Scanner Type | 2D Area Imager |
---|---|
IP Rating | IP42 |
Print Contrast Ratio (Minimum) | 25% |
Motion Tolerance | 25 IPS |
Ambient Light | 0 - 100, 000 lux |
ESD Protection (Air Discharge) | 16 kV |
Operating Temperature | 0 to 50 °C / 32 to 122 °F |
Storage Temperature | -40 to 70 °C / -40 to 158 °F |
Humidity (Non-Condensing) | 5 - 95% |
Light Source | Red LED |
Resolution | 0.1 mm (4 mil) |
Interface | USB, RS-232, Keyboard Wedge |
Drop Resistance | Withstands drops from 1.5 m / 5.0 ft |
Weight | 145.0 g / 5.1 oz |
Image Sensor | 752 x 480 pixels |
Decode Capability | 1D / Linear Codes, Stacked Codes, 2D Codes, Postal Codes |
Reading Angle | Pitch: +/- 65°, Roll: 360°, Skew: +/- 60° |
Power Supply | 5 VDC +/- 5% |
Explains the omni-directional scanning capabilities and aiming system.
Provides instructions for physically connecting the reader cable to the host.
Details basic operation, including trigger pull and aiming system activation.
Lists and describes the supported host interfaces for the scanner.
Guides users through selecting the correct interface type using programming bar codes.
Details various keyboard interface settings like key encoding and specific keyboard types.
Allows configuration of keyboard country/language support for specific interfaces.
Explains how to use bar codes to reconfigure reader settings and features.
Describes how to restore the reader to its factory default settings.
Options for customizing the scanner's aiming system for better targeting.
Details different scanning modes like Trigger Single, Always On, and Object Detection.
Details dimensions, weight, voltage, and current consumption.
Covers light source, tolerance angles, depth of field, and decode capabilities.
Explains the meaning of LED lights and beeper sounds for various functions and errors.
Lists LED flashes/beep codes for identifying hardware errors upon startup.
Provides instructions and precautions for cleaning the exterior and scan window.
Details compliance with FCC rules and other agency statements.
Information regarding Canadian radio noise limits and power supply requirements.
Disposal information for electronic equipment and restricted substances.
Outlines the five-year warranty period and what is covered.
Details how to file a claim and common warranty exclusions.
Provides guidelines to minimize the risk of ergonomic injuries during use.
Information on downloading manuals, software, and utilities like Datalogic Aladdin.
Details available technical support, warranty extensions, and maintenance agreements.
States conformity with EU directives and relevant safety/EMC standards.