Datalogic QuickScan QD2590

ENTER/EXIT PROGRAMMING MODE RS-232 INTERFACE
22 QUICKSCAN™ QD2590
RS-232 STANDARD SETTINGS
Baud Rate
Baud rate is the number of bits of data transmitted per second. Set the reader's baud
rate to match the baud rate setting of the host device. With an improper baud rate set-
ting, data may not reach the host correctly.
$CR2BA00
Baud Rate = 1200
Baud Rate = 2400
$CR2BA01
$CR2BA02
Baud Rate = 4800

Baud Rate = 9600
$CR2BA03
$CR2BA04
Baud Rate = 19,200
Baud Rate = 38,400
$CR2BA05
$CR2BA06
Baud Rate = 57,600
Baud Rate = 115,200
$CR2BA07