Datalogic QuickScan QD2590

ENTER/EXIT PROGRAMMING MODE 1D SYMBOLOGIES
158 QUICKSCAN™ QD2590
Industrial 2 of 5 Check Character Transmission
Enables/disables transmission of an Industrial 2 of 5 check character.
Industrial 2 of 5 Length Control
This feature specifies either variable length decoding or fixed length decoding for the
Industrial 2 of 5 symbology.
Variable Length: For variable-length decoding, a minimum length may be set.
Fixed Length: For fixed-length decoding, two different lengths may be set.
$CU2CT00
Industrial 2 of 5 Check Character Transmission
= Don’t Send

Industrial 2 of 5 Check Character Transmission
= Send
$CU2CT01
$CU2LC00

Industrial 2 of 5 Length Control = Variable Length
Industrial 2 of 5 Length Control = Fixed Length
$CU2LC01