Datalogic QuickScan QD2590

ENTER/EXIT PROGRAMMING MODE 1D SYMBOLOGIES
184 QUICKSCAN™ QD2590
Plessey Check Character Transmission
Enables/disables transmission of a Plessey check character.
Plessey Length Control
This feature specifies either variable length decoding or fixed length decoding for the
Plessey symbology.
Variable Length: For variable-length decoding, a minimum length may be set.
Fixed Length: For fixed-length decoding, two different lengths may be set.
$CPLCT00
Plessey Check Character Transmission = Don’t Send

Plessey Check Character Transmission = Send
$CPLCT01
$CPLLC00

Plessey Length Control = Variable Length
Plessey Length Control = Fixed Length
$CPLLC01