ENTER/EXIT PROGRAMMING MODE
20
QUICKSCAN™ QD2590
GLOBAL INTERFACE FEATURES
The following interface features are configurable by all interface types.
To set features specific to your interface, turn to that section of this manual.
Host Commands — Obey/Ignore
This option specifies whether the reader will obey or ignore host commands. When set
to ignore, the reader will ignore all host commands except those necessary for:
•service mode
• flash programming mode
• keeping the interface active
• transmission of labels.
USB Suspend Mode
This setting enables/disables the ability of USB interfaces to enter suspend mode.
$CIFIH00
Host Commands = Obey
(Do Not Ignore Host Commands)
Host Commands = Ignore
$CIFIH01
$CUSSE00
USB Suspend Mode = Disable
USB Suspend Mode = Enable
$CUSSE01
To Next Page
Loading...
