Datalogic Skorpio-GUN - RS232 Serial Connection

CONNECTIONS
2
2.3 RS232 CONNECTION
The Datalogic Skorpio/F-Color Serial cradle (single or multiple) and the Datalogic
Skorpio Serial/Modem Cradle can be connected to the Host by cable 94A054000 for
9-pin connections.
The RJ45 connector of the desired cable must be connected to the RS232 port of the
cradle.
Then, it is necessary to insert the power supply plug into the power jack on the base
of the cradle and attach the power supply to a power outlet.
Once the Host has been turned on, insert the Datalogic Skorpio-GUN™ terminal into
the cradle.
The same connection can be performed through or one of the
Datalogic Skorpio/F-Color single or multiple serial cradles.
A
B
C
D
Key:
A) Host computer C) Datalogic Skorpio™ Serial/Modem Cradle
or Datalogic Skorpio/F-Color Single Cradle
or Datalogic Skorpio/F-Color Multiple Cradle
B) 94A054000 9-pin serial
cable
D) Power Supply*
* Recommended Power Supply: FPS18 AC/DC Power Supply (94ACC4595).
13